FULLA 2

FULLA 2

£110
VAT already included
In Stock

Schiit Fulla 2

Schiit Fulla 2 is a Combined Headphone Amplifier and Dac

The Schiit Fulla 2 is a second-generation product and is Schiit's answer to the question, “What’s the most affordable way I can get into great sound on my desktop?” And by “my desktop,” we mean everything on it. Schiit Fulla 2 is ready for your headphones, your powered monitors, your analog sources, and more.

Total Flexibility For Your Desktop

Schiit Fulla 2 is a complete DAC/Amp in a single tiny case. Plug the Schiit Fulla 2 into virtually any USB port (USB Cable Included), connect your headphones and/or powered monitors, and you’re set for great music. But that’s only the start.

Use it as a amp, Connect your phone (or any other analog source) to the convenient front jack.

Use it as a preamp, Connect to powered monitors or speaker amps using the variable outputs on the back.

Use it as a DAC, Connect to an external preamp or processor with the fixed 2V line outs on the back, or use the variable outputs for convenient volume control as well.

Use it with phones, iDevices, or computers with low-powered USB ports, We’ve included a second USB port for power input. Plug in your phone charger (or any other 5V DC source with micro-USB output) and Fulla 2 tells your source it doesn’t need any power.

Top-Shelf Components

Like DACs costing more than 10X this price, Fulla uses the latest AKM AK4490 D/A converter. Coupled with an Alps RK09 potentiometer, high-quality filter and amp stages from Texas Instruments, as well as precision thin-film resistors and film capacitors, Fulla delivers performance far beyond its modest price.

Plenty of Headphone Power

Schiit Fulla 2 delivers a super punch, up to 550mW into 16 ohms, together with a vanishingly low noise floor and low output impedance. Or, in English, this means it’s a great match for virtually any headphone.

Made in USA, 2-Year Warranty

By “made in USA,” Schiit mean made in USA.  Fulla 2 is also covered by a 2-year limited warranty that covers parts and labour. 

Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB

Maximum Power, 16 Ohms: 550mW RMS per channel

Maximum Power, 32 ohms: 360mW RMS per channel

Maximum Power, 50 ohms: 230mW RMS per channel

Maximum Power, 300 ohms: 40mW RMS per channel

THD: 0.003%, 20Hz-20KHz, at 1V RMS

IMD: 0.002%, CCIR

SNR: 105db, A-weighted, referenced to 1V RMS

Crosstalk: -75dB, 20Hz-20KHz

Output Impedance: 0.5 ohms

Gain: 1.7 (4.6db)

USB Receiver: C-Media CM6631A

DAC: AKM AK4490 with TI OPA1662-based filter stage

Sample Rates and Bit Depths: 16/44.1 to 24/96 supported without drivers on Windows, Mac, Linux, Android (UAC 1 device)

Output Stage: TI LMH6643 x 2 (1 per channel)

Power Supply: Via USB, with +/- 5V rails via high-current dual-polarity switching regulator, with inductor filtering and local regulation

Power Consumption: 0.8W typical

Size: 8.9 x 6.35 x 3.5 cm (including knob)

Weight: 255 Gramms

    Bad           Good