MAGNI 2

MAGNI 2

£110
VAT already included
In Stock

Schiit Magni 2

Schiit Magni 2 is ready for virtually any headphone!

The Schiit Magni 2 delivers 1.8W of power into 16 ohms, and is ready for virtually any headphone. Switchable gain provides the fine control and low noise floor you need for sensitive headphones, as well as the power you need for hard-to-drive high-impedance headphones and orthos.

Even Better Sound and Performance

Schiit Magni 2 uses a newly refined, fully discrete, constant-feedback gain stage. Not only are Magni 2 and Magni 2 Uber the only fully-discrete amps in their price class, they also use a new gain stage with constant feedback across the entire audio band. No op-amp can claim to do this.

From IEMs to Orthos

Schiit Magni 2 is quiet enough for many IEMs, but provides up to 1.8W into 16 ohms, which is plenty for most orthodynamic headphones. Magni is versatile enough to be a do all amplifier, it may be the only amp you ever need.

Schiit Magni 2 is covered by a 2 year UK limited warranty that covers parts and labour.

Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-200KHz, -3dB

Maximum Power, 16 ohms: 1.8W RMS per channel

Maximum Power, 32 ohms: 1.2W RMS per channel

Maximum Power, 50 ohms: 1.0W RMS per channel

Maximum Power, 300 ohms: 260mW RMS per channel

Maximum Power, 600 ohms: 130mW RMS per channel

THD: Less than 0.003%, 20Hz-20KHz, at 1V RMS

IMD: Less than 0.004%, CCIF

SNR: Greater than 102db, unweighted, referenced to 1V RMS

Crosstalk: -70dB, 20 Hz-20KHz

Output Impedance: Less than 0.2 ohms

Gain: 1.5 (3db) or 6 (14db), selectable via rear switch

Topology: Fully discrete FET/bipolar, constant feedback through audio band, Class AB, 

Protection: standard failsafe DC power input and muting relay

Power Supply:Wall Wart style 16VAC transformer, regulated +/- 15V rails

Power Consumption: 4W

Size: 12.7 x 8.9 x 3.18 cm

Weight: 0.45 kgs


*All measurements made on a Stanford Research SR1 or SR1+ Audio Analyser

    Bad           Good